100ml Smart Perfumer Diffuser for Small Place

Product Introduction:

This 100ml Perfumer Diffuser for Small Place is a timed automatic aerosol device to provide continuous fresh air for hotels, entertainment venues, nightclubs, KTV, auto 4S shops, clothing stores, beaty leisure and entertainment, exhibition halls, and other banking office environment, to ensure comfortable environment for customers.

Special Notes

1,Remenber to install anti-theft screw on the back plane to prevent the refined oil being stolen.

2,The data memory switch is used to store the setting data in case of unusual power-off, thus, preventing the loss of setting data. Remenber to set the data memory switch to ON when you start using the diffuser.

3,This Wall mount Smart Aroma Diffuser is program-controlled and can be set to work at different days, in different time segments, and in different density, to satisfy different customers and different scenarios.

4, When replacing the refined oil, you can pull up the oil windpipe to ease the removal or installation of the oil bottle.

Packing details:

1pc/ inner box, 8 inner boxes/ carton.

Carton size: 61.5X 32X 24 CM

G.W/N.W: 8/7KGS ( 8PCS)

voltage: 12v,110v,220v

Operations:

1) Connect the power:

Plug one end of the power cable to side access port of the auto aroma diffuser and the other end to the city electrical outlet. Then the screen displays the contents.

2) Intoduce the control panel:

The buttons on the control panel control the whole procedure of the settings,as follows:

MODE: Set working periods,time segments,and cycling time ON and OFF.

SET: Set time segments and working days. ( Note: Long holding of SET button will reset this auto aroma diffuser.)

UP: Upwards fine tune time segments,oil density data,or working days.

DOWN: Downwards fine tune time segments,oil density data, or working days.

TOTAL TIME: Press this button to check the total working duration of this auto aroma diffuser to see whether you should replace the refined oil. (Note: You can clear the total working duration by pressing TOTAL TIME and then UP button.

3) Set the system time:

Synchronize diffuser time to the local time, in 24-hour time format.

Press SET button and the hour blinks. Press UP or DOWN button to adjust the hour. Then press SET button again to finish the hour setting. Then minute blinks, and press UP or DOWN button to adjust the minute. After that, press SET button again to finish the minute setting. Then,working days blinks, and press UP or DOWN button to adjust the working day. After that, press SET button to finish the setting.

4) Set timing ON and timing OFF.

You can set two time segments for timing ON and OFF.

Hold DOWN button for three seconds and (1,2,3,4,5,6,7) blinks. Press UP or DOWN button to select a working period and then press MODE or SET button. Then the screen displays"1", which indicates that you can set the first time segment. Press SET button to display(00:00),which indicates the hour and minute. The hour blinks and the ON indicator is ON. In this case,press UP or DOWN button to set the timing on hour, and then press SET button to finish the hour setting. Perform the same procudure to set the timing on minute.

When the screen displays (00:00) and the OFF indicator is ON, press UP or DOWN to set the timing off hour, and then press SET button to finish the hour setting. Perform the same procedure to set the timing of minute.